New spirit

greetings successful

After almost a couple of weeks I did not update this blog, is because I am busy in the real world and coincidentally today I was online, so I had the chance to update this blog.

Some of this time, the factory where I worked was damaged badly enough that it took a serious improvement, I along with the engineering team has been working with all abilities have to be able to tune in all the work that is dormant, and alhamdulilla, we have successfully completed all of the work day right this.

I am very Bengali with the engineering team that we have, because they work with all the dedication that they have, I think I'll ask them bonuses.

And for those days, we expect everything to run smoothly, to request the support of all fellow bloggers

greetings from me

Zulham efendi

Read More [...]

Posted in knowledge working

back activity

In the middle of last month and early this month, we had a vacuum of factory activity, it is in because the factory that we manage are under repair, and after passing through a serious effort to repair any damage to natural, we can finally plant back in operation .

Jaw vertical shaft still attached which serves over size material processing

Some time ago, we are still using Jaw Vertical Shaft for processing material over size, and it works fine, but because it has been a long and old tools eventually could no longer work with the maximum, over size material which is derived from the filter stone breaker can not be at a maximum if so many time consuming and costly.

After consulting with the technical team and also with our leader, finally decided to replace it with a Jaw Vertical Shaft Clip Jaw, Jaw same type Jaw Jaw Secondary and Primary.

 Type Jaw Clip I capture the picture, it appears not installed background jaw vertical shaft which is also not in the locker

Secondary Jaw has the same type of return Jaw

And the results obtained from these tools work pretty good, other than that type Jaw like this has several advantages compared with Vertical Jaw Type, .. ie:

• Jaw Type these can be set according to the size is needed

• Its components are not too expensive when compared with Vertical Jaw Type

• Treatment Type Jaw, it is not as complicated type vertical jaw

• Has the durability and the better preserved on appeal type vertical jaw

Jaw Clip Shown in the picture is installed and we have used

There are many other types of jaw clip several advantages, such as what we're using now, that in the end the most and berkualitaslah we needed.

greetings successful 

Read More [...]

Posted in about factory

Back to Nature

greetings successful

Back to Nature, a slogan that has worldwide and in nearly every country has announced, and as a good citizen very worthy to support all government programs.

various government policies that include: planting and maintenance of the river has started in stimulate, One thing you should realize is the impact in a broad if we ignore it.

on the other hand, the use of alternative energy, it must be in response to many parties for this program can run successfully, and in which we have done in a variety of ways to be able to get a lot of these alternative energy resources.

exploiting the power of the river is one of them, a strong river current can create a great power, so the power of the force was created to encourage power plant turbines, power generated from this activity is environmentally friendly electricity that produces no pollution to the public.

some other alternative energy sources can also be utilized, such as wind power and energy derived from natural materials such as manure and decaying garbage.

Animal waste contains substances that can produce good energy, can be use to make the stove, in Indonesia this sort of thing is called bio-technology.

manure is stored in a long time so it will be easy to produce bio-gas which ignited the fire, then the gas will be channeled into burning furnaces have been provided.

There are many other alternative energy sources that can be utilized to replace the primary energy has begun to diminish.

Read More [...]

Posted in global issues

Factory Activity overview

all blogger friends - Assalamu Alaikum

He began our activities in the early new year, allow me to share about some of our activities in some time ago, I capture this activity through some photos I took on purpose.

You can also see how the image of the factory where I worked for this, hopefully can provide significant benefits also hope to give a shot a passion for us, so that we can work better

Here are some pictures

 

So some pictures of our activities at the plant and asphalt mixing plant stone crusher Perkasa PT Graha Harfia where I and some of my staff to work

greetings from me

Read More [...]

Posted in pictorial information

Happy New Year 2013

Happy New Year 2013 - The time kept changing drove us all to the good changes, everyone hoped that, as well as with us here.

The year 2012 has passed replaced by the new year, of course, also have a new spirit, hope and of course we all became to be the hope of all people to be better this year with last year.In which we work, there are several significant changes at the beginning of this year, starting with changes in the management structure of the project up to a few basic rules that bind employees to work more optimally.

The shift occurred with the project leader at the authority to give it Filhan. K who previously served as operations manager of the factory, while the official word last time I heard him on the appeal to the central office, while I myself was still serving in assistant manager cum chief of logistics operations and construction, before I was in the Offer to fill the vacancy for the post of operations manager in the empty living relatives Filhan. K, but I refused because there was no change in the salary for the new position, I am more than happy with what I've been through.

 
Some plans have a long-term program we put that we pour into the draft to improve the quality of production.

Some of the obstacles that we've experienced in the past year as stock material shortages and delays in completion of the project we will try to not happen in the new year.

On the one hand, we have also demanded a non-technical support to the leadership of our company so that we can work optimally and efficiently, such as improvement in the quality of spare parts for the equipment we use, this is because some times we find shipment of parts and equipment that do not comply quality standards and quality.

And in the end, we as employees of PT.Harfia Graha Perkasaa can make this as the beginning of the year to continue to rise towards the success that has been planned from the outset.

greetings from me.

Read More [...]

Posted in knowledge working

Logistics

Logistics - Certainly, you have often heard the word logistics, and logistics in general it means "inventory" in the scope of work we have logistics significant role, it is because we project viability depends on how the management of these resources.

Similarly, in some other work, logistics guarantee the availability of materials and equipment that will be used for the purposes of production and operations.
You can imagine if a factory or a workplace engaged in the industry do not have the logistics, it must have been a little groove production and operations will be disrupted.

Within the scope of our work, logistics itself is divided into 2 parts

- Logistics equipment

- Material logistics

Both of these items are under the supervision of the head of logistics that I own

The division aims to facilitate the control of a job so they can save time and simplify the working mechanism.

• LOGISTICS EQUIPMENT
  Ensure the availability of equipment and spare parts for heavy equipment, and the factory is vehicle main tasks officers on duty in the field of logistics equipment, why in the sense of the need to ensure ketesediaan equipment and spare parts?, It's in because in every operation of heavy equipment, vehicles and works uncertain when damaged, can be day, night, or when not busy at his pun.tersedia equipment and spare parts will ensure operations continue, because rapid treatment for any damage caused, especially if the works is not in traffic away from the center of the vehicle or equipment sales and parts.
  
  Availability of this, it would make the activity a works looks very professional and quick in producing goods production, as happened in the factory that I manage.
  
  When we were producing asphalt suddenly our tools are a type loader cat 950 f having problems on fuel injection, upon inspection it turns out that is damaged its  fuel filter that has been worn by time, because we have good equipment logistics course  fuel filter the problem was quickly replaced so that the production of asphalt we keep running without any significant problems, try to imagine if we did not have the stock diesel filter, it is clear that our production activities will be disrupted and this will have a negative impact on consumer confidence to us.
  
  
  
  

stock pile fuel filter

• MATERIAL LOGISTICS
  In this position, the main task is to supervise the works processed raw materials (minerals mined gol.c), and the works in the form of processed crushed stone, gravel filter, sand urug, tidal sand and boulders are also included so that an asphalt Our leading commodities so far, including therein the incoming material is sent from another work location.
  
  Supervision aims to monitor the flow of incoming and outgoing materials also have been produced since it all boils down to the level of income and the turnover of the company where we work, and this is our bottom line.
  

 pile the material supply logistics for production

Both of these positions have a very vital role in the smooth running of the project work in our place, and our chief hope for it is also very big at all, considering the income and earnings of our company depends on how we are to be in the field to maximize all resources and efforts to achieve the target result of the planned

greetings from me

Read More [...]

Posted in knowledge working

Stone Crushing Machine

Stone Crushing Machine - Technology Asphalting

Stone Crushing Machine is a kind of tool which serves to destroy the large boulder into fragments kecil.Alat is designed in such a way to be able to destroy the rock at some stage.

one example of a stone crusher

 

I myself have done extensive research on who discovered the tool of this type, due to the limited literature that I have, to look on the internet because I do not yet internet.Tapi connection limitations are obvious, this tool is one of the latest discoveries of this century, the can help and reduce the burden of the people to be able to have a few cubic feet of crushed stone.

Crushed stone itself, it is useful for the construction or building infrastructure and housing.

Examples of broken stone

 

This stone crusher machine, when working still controlled manually on a prepared panel space.

There are several components that are contained in a series of work from Stone Crushing Machine, which one of them is broken stone filter (see picture)

 

 

Looks sieve broken rock from the outside

Looks crushed stone filter components consisting of a series of metal arranged in such a way as to be a series of sieves

Piles of broken stone is the result of the filter

 

 

 

So what can I inform all blogger friends, I hope this information is helpful to us all

greetings from me

Read More [...]

Posted in about factory

Character of Work In Need

Character of Work In Need - Assalamu Alaikum

Friend Blogger.

In a company either privately owned or owned by the government, its growth is very dependent of the management system and the work of its employees.

A company will not increase if you do not have the workers - workers who are reliable in the field.

This is particularly felt at all, as I experienced.

And one very important part of the skill of a worker is working character inherent in these workers.

The characters work well is if the worker is very understanding of the functions and responsibilities of the job in amanahkan her, trying to be able to complete assigned tasks with emphasis on the quality of the results, appreciate the time and continue to add insight and mindset.

Work is a good character not underestimate any of the problems faced, responsive and has a broad view of the problem in the face, a good use of time and wastes no time utilizing logistics.

A mechanic for example, if the mechanic has the character of a good job, it will not linger in the work, quickly repair any damage there even if it's just a small bolt loose.
Because he knows, if a little damage in view of trivial and trivialized it will experience more severe damage and if it is severe it will be more difficult to repair and will possibly replace with a new tool or machine, replacing a machine or appliance with a recently, due to severe damage initially trivial, is a failure of the mechanics.

Establishing a good working character, is not an easy business, it takes time and a lot of opportunities, on the other hand a worker should have the zeal to increase their knowledge and its capacity in the areas of work that wrestled her.

greetings from me

Read More [...]

Posted in knowledge working

Exhaust Gases Of Combustion

Exhaust Gases Of Combustion - Assalamu alaikum

blogger friends.

Creating a climate and fresh air is an integral part of the management of a plant, especially if the plant is located in a densely populated area it becomes an obligation on the part of management to be able to sterilize the environment around the plant that may be affected by the effects of the activities of the plant.

In the area of ​​the factory where I work, is a very fundamental problem at all, we often get complaints from people who feel disturbed by our activities over the years.

The problem that often complaints by the public about our activities is Flue Gas from the rest of the burning material of asphalt or a strong odor and is very annoying, we realized it, we therefore endeavor to be able suppress the effect of this exhaust.

Our technical team has been working hard to assemble a powerful tool appropriate to reduce the exhaust gas is very disturbing.

And we call it Shock Dust.

This tool shaped box with a tubular shape with a certain diameter, inside the box are designed with iron pipe size 2/3 inches that had been given small hole that aims would produce a rushing torrent of water if the pipe is flowing water.

Pipes are attached to the inside walls of the box and the iron pipe end menyumbul out which will be interconnected with the nearest water source.

When burning material takes place it will automatically generate a solid black exhaust, this is because the fuel used to burn the asphalt mix material is coal.

Flue gas consists of a mixture of smoke and dust particles of net coal black color, Flue Gas is then indirectly we point to the chimney exhaust, but we distribute to the iron box which was prepared with the water flow.

Exhaust goes into the metal box that has been ejected water on the inside and a torrent of water that hit the exhaust so that it will separate the residual coal dust with smoke residue.The results of these tools work is the remaining sludge is coal dust and smoke residue that has been separated from the coal dust.

We are aware of this tool is not working so the maximum, but at least we have tried to be generating the environment and clean air, and we have managed to make it happen, it is proved by the absence of further complaints from the public about our activities.

And basically, create the conditions, climate, the environment and air cleaner yag is the obligation of every business operators.

greetings from me

Read More [...]

Posted in about factory